Customization: | Available |
---|---|
Usage: | Light, Electronic Billboard |
Output Type: | Single |
Still deciding? Get samples of US$ 5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
MODEL | HVU-12-12 | HVU-12-24 | HVU-12-48 | |
OUTPUT | DC Voltage | 12V | 24V | 48V |
Voltage Tolerance (note 3) |
±1% | ±1% | ±1% | |
Rated Current(note 5) | 1A | 0.5A | 0.25A | |
Current Range | 0-1A | 0-0.5A | 0-0.25A | |
Rated Power | 12W | 12W | 12W | |
Ripple & Noise(note 2) | 120mVp-p | 120mVp-p | 120mVp-p | |
Setup, Rise, Hold Time | 800ms,30ms,20ms | |||
INPUT | Voltage Range | 88~264 VAC 47-63Hz; 125~370VDC | ||
AC Current | 0.25A/230VAC 0.5A/115VAC | |||
Efficiency | 81% | 83% | 83% | |
Inrush Current | COLD START 36A/230VAC | |||
Leakage Current | <2 mA/240VAC | |||
PROTECTION | Over Load | ≥110% | ||
Protection:Hiccup mode,recovers automatically after fault condition is removed |
||||
HIGH TEMPERATURE |
Temperature of transistor internal contact over 150ºC, start the over temperature protection |
|||
Protection:cut off the output,recovers automatically after fault condition is removed |
||||
ENVIRONMENT |
Working Temp., Humidity |
-10ºC~+60ºC;20%~90 %RH | ||
Storage Temp., Humidity |
-20ºC~+85ºC;10%~95 %RH | |||
Vibration |
10~500Hz,2G 10min./1cycle,period for 60 min, each along X.Y.Z axes |
|||
SAFETY | Withstand Voltage | I/P-O/P:1.5KVAC I/P-FG: 1.5KVAC O/P-FG:0.5KVAC | ||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC | |||
STANDARD | Safety Standard | EN61347-1 EN61347-2-13 EN62384 IP67 | ||
EMC Standard | EN55015 EN61547 EN 61000-3-2/3 EN61000-4-2/3/4/5/6/8/11 | |||
OTHERS | Weight | 0.15Kg | ||
Packing | 100PCS/16Kg/0.027m3 | |||
NOTE |
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. |
|||
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf |
||||
parallel capacitor. | ||||
3.Tolerance : includes set up tolerance, line regulation and load regulation. |