HDR-30, 30W Single Output DIN Rail Type Switching Power Supply Output 12VDC 2A
|Min. Order (Pieces)||FOB Price|
|1+||US $10.1 / Piece|
·Protections: Short circuit/ Over load/ Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
Isolation class Two
LED indicator for power on
100% full load burn-in test
2 year warranty
Dimensions: 78*93*56mm (W*H*D)
Ripple & Noise
DC Adjustment Range
Setup, Rise, Hold Time
100ms,30ms/230VAC100ms,30ms/115VAC at full load
85~264 VAC47~63 Hz; 120~370VDC
0.88 A/115 V 0.48A/ 230 V
Cold start 15A/115V 30A/230V
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Protection type: Shut down o/p voltage, re-power on to recover
Working Temp., Humidity
Storage Temp., Humidity
10~500Hz,2G 10min/1cycle, period for 60min, each along X, Y, Z axes
I/P-O/P:100M Ohms / 500VDC
Design refer to UL60950-1,TUV EN60950-1,EN50178
Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2,EN61204-3
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
HDR-30W image, 5VDC, 12VDC, 15VDC, 24VDC can be offered.