HDR-45, 45W DIN Rail Switching Power Supply 5VDC, 12VDC, 15VDC, 24VDC Can Be Offered
|Min. Order (Pieces)||FOB Price|
|1+||US $12.2 / Piece|
5VDC,12VDC,15VDC,24VDC can be offered
·Universal AC input/ full range
·Protections: Short circuit/ Over load/ Over voltage/ Over · temperature
·Cooling by free air convection
·Can be installed on DIN rail TS-35/7.5 or 15
·LED indicator for power on
·100% full load burn-in test
·Fixed switching frequency at 100KHz
·1 year warranty
·Dimensions: 93*78*67mm (L*W*H)
Ripple & Noise
DC Adjustment Range
Setup, Rise, Hold Time
800ms,60ms,100ms/230VAC at full load
85~264 VAC47~63 Hz;120~370VDC
1.5 A/115 V 0.75A/ 230 V
Cold start 28A/115V 56A/230V
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Protection type: Shut down o/p voltage, re-power on to recover
Tj 135 typically (U1) Detect on heat sink of power transistor,shut down o/p voltage, recovers automatically after temperature goes down
Working Temp., Humidity
Storage Temp., Humidity
10~500Hz,2G 10min./1cycle, period for 60min, each along X, Y, Z axes
I/P-O/P:3KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC
Design refer to UL508,TUV EN60950-1
Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
HDR-30, HDR-45, HDR-60 are the same dimension.