HSCN-1200, 1200W Switching Power Supply with Parallel Function 24VDC, 50A
|Min. Order (Pieces)||FOB Price|
|1+||US $84.8 / Piece|
· High reliability, low ripple
·AC input voltage AC200~260V
·Protections : Short circuit/ Over load/Over voltage/ Over temperature
·Built-in remote ON-OFF control and remote sense function
·With parallel function
·Can adjust from 40%~100% output voltage by external control 2-5V
·Forced air cooling by built-in DC fan
·2 year warranty
Ripple & Noise
DC Adjustment Range
±5%; Can adjust from 40%~100% output voltage by external control 2-5V
Setup, Rise, Hold Time
800ms, 50ms, 16ms at full load
200~260 VAC47~63 Hz; 290~370VDC
11A/ 230 VAC
Protection:Current limiting, delay shut down o/p voltage, re-power on to recover
Protection type: Shut down o/p voltage, re-power on to recover
TSW1(Power transistor) When temp. >100 ºC, shut down o/p voltage, re-power on to recover
Working Temp., Humidity
Storage Temp., Humidity
10~200Hz,2G 10min./1cycle, period for 60min, each along X, Y, Z axes
I/P-O/P, I/P-FG, >100M Ohms / 500VDC
Design refer to UL1950,CSA22.2,IEC60950
Design refer to FCC Part 15 Class A
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.